Hotchkis 2269 Sway Bars, Set, 605 Steering Box, 59-64 GM B-Body, Sport User Manual

Hotchkis For the car

Advertising
background image

2269 FRONT AND REAR SPORT SWAY BAR SET

59-64 CHEVROLET B-BODY (605 Box Only)

Thank you for your purchase from our line of classic Chevrolet B-body suspension parts.

Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis

Performance products. Visit us online @

www.hotchkis.net

 This installation will require drilling new mounting holes in the frame for both the front and rear

sway bars

. Please read instructions carefully to avoid unnecessary drilling.

 You will have to remove the pitman arm to install this sway bar!

INSTALLATION OF HOTCHKIS PERFORMANCE FRONT SWAY BAR

1)

Securely block the rear wheels of the vehicle and raise the vehicle with a jack. Support the
vehicle on jack stands. The wheels of the car should be turned straight for ease of installation.
Some vehicles do not have a stock front sway bar, so step 2 can be ignored. This installation
will also require a pitman arm puller. Use the photos below for reference.

The car shown above has power steering and a sway bar factory installed. Owners of cars without a

factory sway bar should note the position of the brackets and end link mounts, as you will be adding all

of these at a later time.

Advertising
Table of contents