Hotchkis 2269 Sway Bars, Set, 605 Steering Box, 59-64 GM B-Body, Sport - Manual (Page 3)

3
4) With the steering assembly hanging free, you should now be able to remove the stock sway bar.
Leave the steering loose for installation of the Hotchkis sway bar at a later step.
5) Every vehicle should have two holes on the passenger side and four holes on the driver’s side
in the frame from the factory for mounting a stock sway bar. Use the front factory holes to bolt
the new sway bar retainer bracket in place. With the bracket bolted in to locate the second hole,
drill out the second hole. Use the 3/8” bolts from hardware kit #1735 to install the sway bar.
6) Install the included endlinks as shown below. Leave the endlinks loose for now, this will allow you to
maneuver the bar more easily.