Hotchkis 2269 Sway Bars, Set, 605 Steering Box, 59-64 GM B-Body, Sport User Manual
Page 16
Advertising
16
»
Once the clevis brackets are installed, loosen, but do not remove, the U-bolts holding
the axle clamps. This eases swaybar centering and attaching the endlinks to the
dogbones.
»
Attach the dogbones to the clevis bracket.
»
Attach the swaybar to the dogbones.
»
After all the hardware is loosely in place, fully tighten the hardware starting with the U-
bolts. Make sure the U-bolts are facing straight down. Finish off the install by tightening
the dogbone hardware. Your Done!!!
Advertising