Installation of hotchkis front sway bar, Sport sway bar kit 2254 – Hotchkis 80111 TVS System, 70-74 Dodge Challenger User Manual
Page 28
Thank you for your purchase from our new line of Mopar parts.
Please call us at 877 - 4NO - ROLL if you have any questions
regarding the service or installation of your Hotchkis Performance products.
IMPORTANT: PLEASE READ THE ENTIRE
STARTING THIS INSTALLATION. THERE’S SOME HOLE DRILLING INVOLVED
INSTRUCTION MANUAL BEFORE
AND IT WOULD BE A SHAME TO MAKE ANY UNNECESSARY HOLES DUE TO
INSTALLER ERROR. METAL GRINDING IS ALSO NECESSARY.
1F
Raise the Vehicle
Raise the vehicle and safely secure it on jack stands. Remove either the driver or passenger
side wheel.
2F. Disconnect End Lniks
Disconnect the stock sway bar end links form the lower control arm and the sway bar
3F. Disconnect Bushing Brackets
Disconnect the bushing bracket from the subframe bushing mounts.
4F. Remove Subframe Bushing Mounts.
Unbolt the 2 nuts and remove the subframe bushing mounts.
Installation of Hotchkis Front Sway Bar
Sport Sway Bar Kit 2254
70-74 Chrylser E-Body ‘Cuda, Challenger