Hotchkis 80111 TVS System, 70-74 Dodge Challenger User Manual
Page 35
Advertising
We’ve noticed on some E-bodies that the distance between the left and right frame rails were
½” wider. If the frame bracket does not line up in the center of each frame rail due to the
frames having a wider span, then please install the optional spacer between the sway bar and
the end link.
6R. Mock Up Reinforcement Frame Brackets
Since the vehicles frame rails are made out of thin steel, it is necessary to reinforce the frame
rails in the area that the sway bar mounts to. There are 2 brackets that are included in your
kit (one per side).
Advertising