Hotchkis 80111 TVS System, 70-74 Dodge Challenger User Manual
Page 4
Advertising
1110 66-70 B-Body, 70-14 E-Body
Hotchkis Performance LLC.
4
6. Install A-Arm Relocators
Slide the stock camber bolt w/washer through the top hole of the A-Arm
Relocator. The other end will end up inside the engine bay. Install the washer
and nut snugly, but do not fully tighten. You will need to induce some preload
to position the Relocator properly. You can do this by rotating the camber bolt
clock wise until you feel resistance. The Relocator should position itself snugly
onto the frame. Fully tighten the camber bolt by tightening the nut side keeping
the bolt static.
Advertising