7r. clean area for welding – Hotchkis 80111 TVS System, 70-74 Dodge Challenger User Manual
Page 37
Advertising
7R. Clean Area for Welding
Raise the rear of the vehicle and remove the rear wheels. This will allow you go access the
outer section of the frame rails easier. Sand the paint off the frame rails near the outline of
the bracket.
Sand the frame triangle bracket in the sections showed below.
8R. Weld Triangle Bracket to the Reinforcement Bracket
C-Clamp the triangle frame bracket to the reinforcement bracket and rosette weld the 2 holes
you marked at the end of step 6R. Once the brackets are together, weld a bead along the
Advertising