Hotchkis 80111 TVS System, 70-74 Dodge Challenger - Manual (Page 54)

4010 & 4011S/L
Hotchkis Performance LLC.
5
3. Remove Nuts from Frame
Temporarily support the rear subframe with jacks to relieve the load on the leaf springs. Do not
jack up the car too much or else the weight of the rear end and wheels will hang in the air and
cause the front mount to pull downward. Remove the 4 nuts on the front leaf spring mounts.
3b. Torque Box Vehicles ONLY!
Some vehicles have torque boxes which may cover the path of the subframe connectors. If you
car does not have torque boxes, then you can proceed to step 4. You will need to cut the
forward section of the torque box so the subframe connector can mount flush to the floor pan.