Wiha industrial, Wiha info – Wiha Tools Product Catalogue 2012-2014 User Manual
Page 129
257
www.wiha.com
Z 12 0 02
Diagonal cutters Industrial.
Standards:
DIN ISO 5749.
Head shape:
Semi-circular, swedish style.
Design:
Low wear lap joint, riveted and able to withstand high loads.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Lightweight action, clean cutting achieved by specially milled precision
cutting edges.
Durable cutting edges due to additional induction hardening to
approx. 62 HRC.
Material:
High-quality tool steel, tempered.
Application:
For soft and hard wires.
Z 16 0 02
Heavy-duty diagonal cutters Industrial.
Standards:
DIN ISO 5749.
Head shape:
Semi-circular.
Design:
Low wear lap joint, riveted and able to withstand high levels of load.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Lightweight action, clean cutting achieved by specially milled precision
cutting edges.
Long term cutting is achieved through additional inductive hardening to
approx. 64 HRC.
Material:
High-quality tool steel, tempered.
Application:
Power assisted, all round diagonal cutter for soft wire as well as the most
stringent of demands made by piano wires.
Z 17 0 02
Industrial heavy-duty end cutting nippers.
Standards:
DIN ISO 5748.
Head shape:
Classic style.
Design:
Low wear lap joint, riveted and able to withstand high levels of load.
Striking high quality cutting edge with high cutting performance and
low application of force due to highly precise processing.
Good durability due to additional induction hardening of cutting edges to
approx. 62 HRC.
Material:
High-quality tool steel, tempered.
Application:
Power assisted, all round diagonal cutter for soft wires as well as
demanding piano wires.
Also appropriate for binding (plaiting) and cutting wire netting in reinforced
concrete structures.
Z 55 0 02
Stripping pliers Industrial.
Standards:
DIN ISO 5743.
Head shape:
Precision cutting edge prism for even cutting of cable insulation.
Design:
An easy to use adjusting screw allows the stripping diameter to be set.
Opening spring for effortless and sensitive handling of pliers.
Material:
High-quality tool steel, tempered.
Application:
Simple stripping of cables and strands of up to ø 5 mm/ 10 mm²
conductor cross-section.
Z 05 1 02
Needle nose pliers Industrial with cutting edge.
Standards:
DIN ISO 5745.
Head shape:
Angled, approx. 40°.
Design:
Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 62 HRC.
Material:
High-quality tool steel, tempered.
Application:
Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
256
Z 01 0 02
Combination pliers Industrial.
Standards:
DIN ISO 5746.
Head shape:
Extra long cutting edge for flat and round cables.
Design:
OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Cutting edges additionally induction hardened to approx. 62 HRC.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Material:
High-quality tool steel, tempered.
Application:
General purpose pliers for gripping and holding as well as cutting
soft and hard wires and cables.
Z 02 0 02
High-leverage combination pliers Industrial.
Standards:
DIN ISO 5746.
Head shape:
Extra long cutting edge for flat and round cables.
Design:
OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Particularly powerful leverage results in 40% less effort being required for
cutting tasks compared with standard combination pliers.
Cutting edges additionally inductively hardened to approx. 64 HRC,
therefore also appropriate for cutting piano wire.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Material:
High-quality tool steel, specially tempered.
Application:
Power assisted general purpose pliers for gripping and holding as well as
cutting wires and cables ranging in hardness from soft to extremely hard.
Z 07 0 02
Long flat-nose pliers Industrial.
Standards:
DIN ISO 5745.
Head shape:
Extra long head.
Design:
Gripping surfaces serrated and inductively hardened.
Material:
High-quality tool steel, tempered.
Application:
Gripping and right-angled bending of wires and sheet metal parts.
Z 09 0 02
Long round-nose pliers Industrial.
Standards:
DIN ISO 5745.
Head shape:
Extra long head.
Design:
Gripping surfaces serrated and inductively hardened.
Material:
High-quality tool steel, tempered.
Application:
Gripping and bending of wires and sheet metal parts.
Z 05 0 02
Needle nose pliers Industrial with cutting edge.
Standards:
DIN ISO 5745.
Head shape:
Straight shape.
Design:
Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 62 HRC.
Material:
High-quality tool steel, tempered.
Application:
Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
Diagonal cutters and heavy duty diagonal cutters.
Order-No.
30975 140
5
½
4.0
2.5
1.8
160
5
30827
160
6 ½
4.0
2.8
2.0
200
5
30976 180
7
4.0
3.0
2.5
250
5
Order-No.
32333 160
6
½
3.5
2.5
2.0
190
5
32339
180
7
3.8
2.7
2.3
260
5
32341 200
8
4.2
3.0
2.5
315
5
Industrial heavy-duty end cutting nippers and stripping pliers.
Order-No.
36035 160
6
½
3.5
2.5
180
5
36036
180
7
3.8
2.8
200
5
36037 200
8
4.0
3.0
220
5
Order-No.
32345 160
6
½
155
5
Order-No.
32324 160
6
½
2.5
1.8
155
5
32328
200
8
2.8
2.0
200
5
Combination and high leverage combination pliers.
Order-No.
30979 160
6
½
3.0
2.0
195
5
30826
180
7
3.4
2.2
245
5
30978 200
8
3.6
2.5
325
5
Order-No.
32319 200
8
3.8
2.8
2.3
315
5
32320
225
9
4.4
3.0
2.5
370
5
Flat and round-nose pliers.
Order-No.
32330 160
6
½
160
5
Order-No.
32332 160
6
½
140
5
Order-No.
32322 160
6
½
2.5
1.8
155
5
32323
200
8
2.8
2.0
200
5
Wiha Industrial.
Comfortable in your hand, versatile in application.
N E W
Wiha
Info
N E W
Opti-Grip – optimal grip
due to newly designed gripping surfaces
• A firm hold: The 'triple-point support'
protects the workpiece from twisting or slipping.
• Highly effective: Optimum grip even with a large jaw opening –
and at the same time significantly less force needed
• A wide selection: Now in standard Wiha combination pliers
and high leverage combination pliers
Wiha
Info
Wiha DynamicJoint –
Top of their class
• Innovative: Unique joint construction
• Effective: Low loss of force means
less force needed for cutting – up to 40%
• Permanent: Optimal performance even after thousands of cuts
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.