Wiha Tools Product Catalogue 2012-2014 - Manual (Page 139)

277
www.wiha.com
Z 47 2 04 End cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide head.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For frontal, virtually flush cutting of thicker, soft wires.
Z 36 0 04 Needle nose pliers Professional ESD.
Standards: DIN ISO 9655. IEC 61340-5-1.
Head shape: Straight head.
Design: Fine, semi-circular tips. Ridged gripping surfaces.
With opening spring. Surface resistance 10
6 - 10 9 ohms.
Material: C 45 special tool steel, hardened and tempered.
Application: Mainly for precision gripping and bending work.
Z 36 1 04 Needle nose pliers Professional ESD.
Standards: DIN ISO 9655. IEC 61340-5-1.
Head shape: Angled at 45°.
Design: Fine, semi-circular tips. Smooth gripping surfaces.
With opening spring. Surface resistance 10
6 - 10 9 ohms.
Material: C 45 special tool steel, hardened and tempered.
Application: Mainly for precision gripping and bending work.
Z 37 0 04 Round nose pliers Professional ESD.
Standards: DIN ISO 9655. IEC 61340-5-1.
Head shape: Round, short jaws.
Design: Smooth gripping surfaces. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: C 45 special tool steel, hardened and tempered.
Application: Mainly for precision gripping and bending work.
Z 38 0 04 Flat nose pliers Professional ESD.
Standards: DIN ISO 9655. IEC 61340-5-1.
Head shape: Flat, short jaws.
Design: Smooth gripping surfaces. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: C 45 special tool steel, hardened and tempered.
Application: Mainly for precision gripping and bending work.
Z 47 1 04 End cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Extra narrow, slim shape.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires in places
which are particularly difficult to access.
276
Z 43 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Narrow, semi-circular head.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of copper wire in places
which are difficult to access.
Z 44 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, semi-circular head.
Design: Bevelled cutting edges, also appropriate for thin, hard wires.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: All round electronic diagonal cutter for cutting wires
of different hardnesses.
Z 44 3 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, semi-circular head.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires.
Z 46 1 04 Oblique end cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide head, angled at 29°.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires.
Can be used horizontally and virtically.
Z 46 4 04 Oblique end cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Extra narrow head.
Cutting edges angled at 40°.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting thin, soft wires in places
which are particularly difficult to access.
22,5
1,4
9,5
6,5
20,5
2,0
9,5
6,5
5,5
16,5
7,5
11,5
B
F
A
D
22,5
1,5
9,5
6,5
45 o
10,5
9,5
6,0
10,0
14,0
29 o
7,5
12,0
13,5
11,5
7,5
20,0
6,3
10,0
5,8
40 o
13,5
11,5
7,5
6,5
19,0
2,8 5,8
End cutters and gripping pliers.
Order-No.
26840 115
4 ½ 1.4 65 5
Order-No.
26799 120
4 ¾ 9.5 23 6.5 1.4 60 5
27905 145 5 ¾ 12.0 40 7.5 2.0 93 5
Order-No.
26802 120
4 ¾ 60 5
Gripping pliers. Set combinations.
Order-No.
26804 120
4 ¾ 60 5
Order-No.
26806 120
4 ¾ 60 5
Order-No. Series
33507 Z 99 0 001 04 1
Order-No.
26839 110
4 ¼ 0.6 65 5
Diagonal cutter, semi-circular shape.
Order-No.
26826 115
4 ½ 1.2 60 5
Order-No.
26831 115
4 ½ 1.4 1.0 0.4 60 5
Order-No.
26832 115
4 ½ 1.2 60 5
Oblique end cutters.
Order-No.
26835 115
4 ½ 1.2 78 5
Order-No.
26838 110
4 ¼ 0.6 42 5
Wiha Professional ESD.
Precise in every detail.
Z 99 0 001 04 Professional ESD pliers set, 4 pcs.
Dissipative tools, electrostatically discharging.
Design: ESD tools manufactured according to IEC 61340-5-1.
All pliers of high quality tool steel, hardened and fine-polished.
Plier handles electrostatically discharge via all components.
Surface resistance 10
6 - 10 9 ohms.
Pouch: Light and space-saving storage of tools.
Content: Diagonal cutter without facet, 115 mm (Z 41 3 04 series)
Diagonal cutter with facet, 115 mm (Z 44 1 04 series)
Angular forward cutters, with minimal facet, 110 mm (Z 46 4 04 series)
Electric needle nose pliers, 120 mm (Z 36 0 04 series)
Application: Universal set for all cutting work with electronic applications.
Wiha Info
A variety of different pliers are required for
electronics applications.
Simply contact us if you require different models
for other applications.