Wiha Tools Product Catalogue 2012-2014 - Manual (Page 138)

Z 41 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, pointed head.
Design: Bevelled cutting edges, also appropriate for hard wires.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: All round electronic diagonal cutter for cutting wires
of different hardnesses.
Z 41 3 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, pointed head.
Design: Cutting edge without bevel for absolute flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For absolutely flush cutting of copper wire.
Z 41 4 04 Diagonal cutters Professional ESD
with wire trapping spring.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, pointed head.
Design: With fixture for trapping ends of wires which have been cut off.
Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC.
With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting copper wire, function for trapping cut off wire.
275
www.wiha.com
Z 40 1 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Narrow, pointed head.
Design: Bevelled cutting edges, individually tested, also appropriate
for thin, hard wires. Maximum service life of cutting edge achieved through
additional inductive hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For cutting different hardnesses of wires in places
which are difficult to access.
Z 40 4 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Extra narrow, short head for working
in particularly restricted spaces.
Design: Cutting edge almost without bevel for virtually flush cutting, individually
tested. Maximum service life of cutting edge achieved through additional
inductive hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting copper wire in flat places
which are difficult to access.
Z 40 3 04 Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Narrow, pointed head.
Design: Blade without facet, individually inspected, suited to thin, tough wire.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6 - 10 9 ohms.
Material: High alloy carbon steel C 60.
Application: For absolutely flush cutting of copper wire in places
which are difficult to access.
Antistatic arms made of soft,
non-slip elastomer are gentle
on the parts of the hand that
are sensitive to pressure
Precision box joint
with long service life
274
Wiha Professional ESD.
Precise in every detail.
The Professional ESD diagonal cutter with
a broad, pointed head cut soft wires flush. The Professional ESD needle-nose pliers
are predominantly used for fine gripping
and bending work.
Low glare mirror
polished finish
Double leaf spring
for sensitive working
Hard, comfortable elastomer zones
ensure low friction in the movement
range of the fingers
The anti-static,
ergonomic handle is
fixed to the pliers
Suitable for work at ESD workstations
in accordance with IEC 61340-5-1.
Safety Notice:
Wiha Professional ESD pliers are
noninsulated, therefore not suitable
for working on live parts.
Wiha Professional ESD is ideal for
electronics professionals needing
precise, robust pliers.
The formula for success for the
pliers series is as simple as it is
clever: uncompromising sharpness
and hardness for flush cutting,
and pleasant comfort with the
handle for firm, fatigue-free
grasping, holding and cutting.
Wiha Professional ESD.
• ESD safe
Suitable for work at ESD
workstations in accordance
with IEC 61340-5-1, surface
resistance 10
6 - 10 9 ohms
• Anti-static
Unique: all handle components
are discharging (dissipative)
• Precise
Box joint, resistant against
twisting
• As hard as steel
Pliers head drop forged
from high quality steels
• Robust and durable
Cutting edges are individually
tempered and additionally
induction hardened to approx.
64 HRC; joints are extremely
wear resistant and withstand
high stresses, with high-quality
riveting
• Ergonomic
Extra wide handle backs, with
soft and hard zones perfectly
distributed across the handle
• Attractive
Appealing design with
finely polished head
10,5
9,5
6,0
13,5
11,5
7,5
10,5
9,5
6,0
13,5
11,5
7,5
13,5
11,5
7,5
10,5
9,5
6,0
Diagonal cutter, broad, pointed shape.
Order-No.
26816 115
4 ½ 1.4 1.0 0.4 60 5
Order-No.
26821 115
4 ½ 1.0 60 5
Order-No.
26822 115
4 ½ 1.2 60 5
Diagonal cutter, narrow, pointed shape.
Order-No.
26808 115
4 ½ 1.0 0.6 0.3 60 5
Order-No.
26814 115
4 ½ 1.0 60 5
Order-No.
33521 115
4 ½ 1.0 60 5
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.