Wiha Tools Product Catalogue 2012-2014 - Manual (Page 146)

291
www.wiha.com
290
Wiha dead-blow hammer.
A star in the world of recoilless tools.
The face is made of medium-hard
polyurethane for full blows and protects
delicate surfaces and edges.
The special metal filling in the hammer
casing enables recoilless working.
Wiha has now put an end to the
familiar problems associated with
the stress on joints and muscles
when working with recoiling
hammers. The Wiha dead-blow
hammer has a special filling in the
hammer casing to prevent recoil.
Professionals who use these
hammers on a continuous basis, for
example, in tool and die shops or in
body maintenance and sheet-metal
work, appreciate the benefits of this
recoilless hammer from Wiha. Wiha dead-blow hammer.
• Recoilless working due to
special metal filling in the
hammer casing
• The hammer weight is
increased by about 25%
for additional power
• Easy on delicate surfaces and
edges as a result of its comfort
cushing surface
• Available with hickory wood
handle or steel tube shaft
• Faces and wooden handles
available as spare parts
Hammers.
800 Dead-blow hammer with hickory handle.
Faces: Both yellow: Medium hard, colourfast and wear-resistant polyurethane.
Housing: Manufactured from precision steel tubing with welded on shaft,
powder coated.
Shaft: Hickory handle coated with ergonomic profile and high quality surface.
Standards: GS-mark: Tested safety.
Application: Controlled strikes e.g. on workpieces being held by vices or
assembly work.
Extra: With cast iron balls inside the hammer head for recoilless work.
Order-No.
02092 25
320 108 320 5
02093 30 460 115 350 5
02094 35 580 118 355 5
02095 40 760 125 375 5
02096 45 1000 130 380 2
02097 50 1250 135 385 2
02098 60 2000 165 420 2
02099 70 2600 165 430 2
802 Dead-blow hammer with steel tube shaft.
Faces: Both yellow: Medium hard, colourfast and wear-resistant polyurethane.
Housing: Manufactured from precision steel tubing, powder coated.
Shaft: Welded, powder coated steel tube with ergonomic rubber handle.
Standards: GS-mark: Tested safety.
Application: Controlled strikes e.g. on workpieces being held by vices or
assembly work.
Extra: With cast iron balls inside the hammer head for recoilless work.
Order-No.
02122 25
520 108 288 5
02123 30 600 115 290 5
02124 35 700 118 300 5
02125 40 850 125 305 5
02126 45 1060 130 310 2
02127 50 1400 135 365 2
02128 60 2050 165 375 2
02129 70 2750 165 385 2
Sledgehammers. Spare parts.
800 Dead-blow sledge hammer with hickory handle.
Faces: Both yellow: Medium hard, colourfast and wear-resistant polyurethane.
Housing: Manufactured from precision steel tubing with welded on shaft,
powder coated.
Shaft: Hickory handle coated with ergonomic profile and high quality surface.
Standards: GS-mark: Tested safety.
Application: Controlled positioning strikes in assembly and disassembly,
straightening.
Extra: With cast iron balls inside the hammer head for recoilless work.
Order-No.
02101 80
4550 205 880 1
02091 100 6860 210 1000 1
800S Hickory handle for dead-blow hammer.
Material: Carefully selected hickory with high quality surface.
Properties: Over the years, hickory, an extremely hard wood,
has proven to be the best material for hammer handles.
Order-No.
02113 25
295 69 10
02114 30/35 320 113 10
02115 40/45 335 123 10
02116 50 335 133 10
02117 60/70 360 165 5
28051 80 800 550 VPA GS-mark 1
28052 100 900 860 VPA GS-mark 1
800K Hammer face, yellow for dead-blow hammer.
Material: Medium hard polyurethane, colourfast and wear-resistant.
Order-No.
02103 25
16 10
02104 30 22 10
02105 35 30 10
02106 40 45 10
02107 45 63 5
02108 50 86 5
02109 60 130 5
02110 70 178 5
02111 80 250 2
02102 100 449 2 Simple exchange of
worn hammer faces:
1. Grip the hammer in the vice,
lift to remove old hammer face.
2.Press the new hammer face
into the handle until it locks
into position.
Wear safety glasses and protective
gloves when working with soft head
hammers.
In addition, observe the national
standards and regulations.