Wiha Tools Product Catalogue 2012-2014 - Manual (Page 46)

91
www.wiha.com
90
Wiha T-handle torque tools.
For screw applications requiring a specific amount of force.
The ergonomically shaped
multi-component T-handle ensures
fatigue-resistant power transfer.
Wiha's new T-handle torque tools.
Easy to adjust, durable and comfortable.
With slipping clutch -
precise, ergonomic, robust.
Perfectly shaped.
The special feature of these tools is
the ergonomic, multi-component
T-handle with the striking soft
zones that allow particularly
comfortable and effortless power
transmission, even at higher
torques.
Sophisticated mechanism.
The T-handle’s extremely light,
multi-component plastic sleeve
conceals a precise torque
mechanism. This is sealed in an
oil-lubricated bearing and is thus
extremely low-wear with a long
tool life. As soon as the pre-set
torque has been attained, there is
a clearly audible and perceptible
click to prevent exceeding the
pre-set value. Overtightening of
the pre-set value is therefore
eliminated. Release accuracy is
±6% of the pre-set scale value,
as required by EN ISO 6789.
To prevent users from breaking
the blade or damaging the screw
when loosening the screw,
the tools limit the tightening
torque, as well as apply a special
limit to the loosening torque;
this is approximately 30 % greater
than the tightening torque.
Fixed or variable setting of torque
value.
Depending on the intended
application, we recommend one
of the TorqueFix
® -Tplus models
with a pre-set, fixed torque value or
the TorqueVario
® -STplus with scale
and a variable torque value from
5 - 14 Nm. In the case of the
variable T-handle tool, the torque
value is continuously adjustable
on the handle via the adjustment
tool supplied with it.
The numerical display of the
setting value in the upper handle
enables the pre-set value to be
easily read-off in Nm; this virtually
eliminates incorrect readings.
Universal and flexible.
6-mm interchangeable blades
made of high-quality, tough-
but flexible chrome-vanadium
molybdenum steel are available
to match the handles.
Two adapter blades for nuts
(1/4" and 3/8"), together with
a plastic-coated universal bit
holder for all C 6.3 and E 6.3
(1/4") bits, complete the product
range.
Safety first.
Before it leaves the factory,
each T-handle torque tool is
inspected, calibrated and allotted
an identification number.
The result of the calibration
is documented in a factory
calibration certificate, which
is included free of charge with
each tool. This factory calibration
certificate also documents
compliance with national
standards.
Tightening screws properly!
Even in higher torque ranges?
No problem with the new ergonomic
T-handle torque tools from Wiha.
Tightening screws to a pre-set
torque has never been so easy,
comfortable and economical!
Wiha T-handle
torque tools.
• T-handle with soft zones is
comfortable to hold
• High-quality and robust,
precision construction
• Variable design with
easy-to-read, numerical scale
• Each handle is individually
tested, laser-calibrated and
marked with an identification
number
• Limit to the tightening and
loosening torque prevents
damage to the tool and screw
• Torque accuracy ± 6% of
the pre-set scale value
• Large selection of interchange-
able blades, adapter blades
for nuts and bit holders
• Supplied with factory
calibration certificate