Wiha Tools Product Catalogue 2012-2014 - Manual (Page 58)

114 115
www.wiha.com
Wiha product advantages (specialised solutions)
All Wiha product advantages at a glance
Holders Logo Application images Description Advantages
Ball end The Wiha ball end stands for
mobility, thus enabling fastening
of allen screws up to 30°
per side. • Fastenings at angles up to 30° per side
• Quick feeding of the key into the screw thanks to feeding from various angles
• The key does not slip out of the screw, which reduces the risk of accidents
• No deformation of the screw head thanks to precision fitting of the ball end
TORX ®
ball end
The Wiha ball end stands for
mobility, thus enabling fastening
of TORX
® screws up to 25°
per side.
• Fastenings at angles up to 25° per side
• Higher torque transmission due to maximum core diameter
• Elongated profile positioning for further use of the L-key
MagicRing ® Wiha L-keys with Magic-Ring ®
hold allen screws firmly in
any position thanks to
a high-tensile spring steel ring.
• Thanks to the combination of MagicRing ® with the Wiha ball end,
inserting and removing screws is possible, even in hard-to-reach locations
• Securely holds screws made of steel and non-magnetic materials such as stainless
steel, titanium, aluminium and plastics in any position
• Can be used for all standard screws
• Use for applications in which magnetised fastening tools cannot and may not be used
(magnetic environment)!
• Fastenings at angles up to 25° per side
MagicSpring ® Wiha L-keys with Magic-Ring ®
hold TORX ® and TORX PLUS ®
screws firmly in any position
thanks to a high-tensile
spring steel ring.
• Securely holds screws made of steel and non-magnetic materials such as stainless
steel, titanium, aluminium and plastics in any position
• TORX ® and TORX PLUS ® screws manufactured according to Camcar Textron
specifications
• Use for applications in which magnetised fastening tools cannot and may not be used
(magnetic environment)!
Stubby
95°
The new L-key from Wiha,
especially for hard-to-reach
screws and confined spaces. • Reduction of the short L-key arm, especially for hard-to-reach screws
and confined spaces
• Increase in the hand working space of over 30% and thus a reduction of the risk
of injury to the knuckles and fingertips thanks to a 95° bend of the L-key
• Improved access through a reduction of the L-key head height of up to 15%
• Ball end geometry enables fastening at an angle of up to 25°
Colour coding
Red Yellow Green Light green
The Wiha colour guidance
system identifies the output
category. There is a distinction
among the categories Hexagon
metric, Hexagon inch, TORX
®
and TORX PLUS ® .
• Handles and holders in the same colour depending on the output size
• This provides an overview of the tool assortment
Hexagon metric Hexagon inch TORX ® TORX PLUS ®
+30%
95°