VEGA VEGACOM 557 Siemens 3964 and 3964 R procedure with RK 512 - Manual (Page 29)

VEGACOM 557 Siemens 29
S5 functional component
Parameter setting of the RECEIVE component
The information on the data destination, parameter : ZTYP, DBNR, ZANF and ZLAE are irrel-
evant as this information was already defined in the programming package COM 525 with the
order determination.
SSNR: The interface number corresponds to the switch positions in the CP.
(standard feature = 0)
A-NR: The order number corresponds to the setting in the programming package COM
525
ANW: Statement of a double marker word for status description
ZTYP: KC DB Data destination is data component
DBNR: KY 0,0 Data component number, here irrelevant
ZANF: KF +0 Initial word in DB, here irrelevant
ZLAE: KF +0 Data length in bytes, here irrelevant
PAFE: Statement of a marker byte for indication of parameter setting failures
Application example for VEGAMET
Call up in OB20, OB21 and OB22
OB 20
C:CP524_ST.S5D LAE=11
Network 1 0000 Output
:SPA FB 249
Name :SYNCHRON
SSNR : KY 0,0
BLGR : KY 0,3 Block size 64
PAFE : MB 50 Parameter error in merker byte 50
:BE