VEGA MoRoS GPRS 1.3 - Manual (Page 23)

MoRoS GPRS 1.3 Mounting
23
2. Lift the MoRoS GPRS 1.3 perpendicular to the DIN rail until the plastic spring
of the third, flexible snap-in hook engages in the DIN rail.
The MoRoS GPRS 1.3 is now completely mounted.
Connecting the power supply
The device has already been mounted to the DIN rail.
The power supply is connected and switched off.
1. Connect the ground lead of the power supply to the terminal "GND".
2. Connect the plus pole of the power supply to the terminal for the power
supply.