VEGA MoRoS GPRS 1.3 - Manual (Page 57)

MoRoS GPRS 1.3 Functions
57
center. Request further details on the number format of the destination
phone number by your sms service center operator. Enter the SMS message
text in the entry field (Figure 18, page 37 above, position 4).
To send a message for a number of short, 1 second, pulses scroll further down
on the page "SMS dispatch" to the entry field for the desired number of pulses.
Enter (e.g. for a short pulse) a destination phone number in the entry field
"Phone number" (Figure 18, page 37 above, position 5). Enter the SMS mes-
sage text in the entry field (Figure 18, page 37 above, position 6).
Save the settings by clicking "OK" (Figure 18, page 37 above, position 7).
12.9 Outputs
12.9.1 Query the Output States
The MoRoS GPRS 1.3 has digital outputs, whose status you can query and change via the
web interface.
Configuration with the web interface
To query the states of the outputs, click on the button "Update" in the menu
"Outputs" on the page "Output states" (Figure 19, page 38 above, position 3).
You can see the state of the outputs next to the text "Output 2:" after you re-
loaded the page. (Figure 19, page 38 above, position 2).
12.9.2 Switch Outputs
The switch outputs of the MoRoS GPRS 1.3 can be updated via the web interface.
Configuration with the web interface
To switch the states of the outputs, use the radio buttons to select "Open" or
"Closed" for each output in the menu "Outputs" on the page "Output states"
(Figure 19, page 38 above, positions 4 and 5).
Save the settings by clicking "OK" (Figure 19, Page 38, above, Position 6).
12.10 System Configuration
12.10.1 Display System Messages
The MoRoS GPRS 1.3 displays system data such as firmware version, serial number,
hardware version or firmware checksum, together with short system messages about
events and errors on the system data page. For analysis purposes, you can see the de-
tailed messages of the MoRoS GPRS 1.3 on the web interface.