VEGA MoRoS GPRS 1.3 - Manual (Page 59)

MoRoS GPRS 1.3 Functions
59
Save the settings by clicking "OK" (Figure 21, page 39 above, position 1).
12.10.5 Reset
You can reset the MoRoS GPRS 1.3 via the web interface or by pressing the reset key on
the front of the device. You can simply restart your device or reset all settings to the fac-
tory defaults. Use the reset key to trigger a restart of the MoRoS GPRS 1.3 by pressing it
once, at a minimum for three seconds. Pressing the reset key three times for a short time
within two seconds loads the factory defaults of the MoRoS GPRS 1.3.
Configuration with the web interface
To restart the MoRoS GPRS 1.3, use the radio buttons "Restart"" in the menu
"System" on the page "Reset" (Figure 22, page 39 above, position 2). Click on
OK (Figure 22, page 39 above, position 1) to perform the restart.
To restart the MoRoS GPRS 1.3 and to reload the factory defaults at the same
time , use the radio buttons "Load basic settings and restart"" in the menu
"System" on the page "Reset" (Figure 22, page 39 above, position 2). Click on
OK (Figure 22, page 39 above, position 1) to perform the restart and to reset
the MoRoS GPRS 1.3 to the factory default.