VEGA MoRoS GPRS 1.3 - Manual (Page 24)

Mounting MoRoS GPRS 1.3
24
Disassemble the device from the DIN rail
Instructions on how to disassemble the MoRoS GPRS 1.3 from a DIN rail in a
cabinet:
You will need a Philips screwdriver with a 4.5 mm blade.
The power supply of the cabinet is switched off and secured against being
switched off accidentally.
All cables at the MoRoS GPRS 1.3 are disconnected.
Danger
Exposed electrical components!
Risk of death through electric shock hazard!
Prior to the disassembly, switch the power off and secure
it against being switched on again.
1. Insert the Philips screwdriver into the flexible snap-in hook of the MoRoS
GPRS 1.3 as shown in the diagram.
2. Turn the Philips screwdriver into the direction of the MoRoS GPRS 1.3 as
shown in the diagram.