VEGA MoRoS GPRS 1.3 - Manual (Page 62)

Functions MoRoS GPRS 1.3
62
After the completed update, a page is displayed which confirms the suc-
cessful update procedure. Do not perform any action at the web interface
until this page is displayed.
6. Proceed with the second file "uRamdisk" as with the first file, without per-
forming a restart. Repeat the steps from step 3.
7. In the menu "System", switch to the page "Reset" and select "Restart".
The new firmware is now active.
8. It may be necessary to reload the default settings after the restart, to have a
correct configuration, in case the old configuration is incompatible to the
new one.
12.10.7 Download the Configuration File from the MoRoS GPRS 1.3
You can download the configuration of the {{PRODUKTBEZEICHNUNG}}} via the web in-
terface. With this file, you can configure other, equal devices, or safely store a function-
ing configuration.
Configuration with the web interface
To download the configuration of the MoRoS GPRS 1.3, click on the blue ar-
row in the menu "System" on the page "Download" (Figure 24, page 39 above,
position 2). The browser will prompt you to save the file.
12.10.8 Uploading the Configuration File to the MoRoS GPRS 1.3
You may upload a previously downloaded configuration file to the MoRoS GPRS 1.3, to
replace the current configuration of the MoRoS GPRS 1.3 by the settings in the file.
Uploading the configuration file of the MoRoS GPRS 1.3
You have a configuration file for your version of the MoRoS GPRS 1.3.
1. In the web interface of the MoRoS GPRS 1.3, under "System", switch to the
page "Update" (Figure 23, page 39, above).
2. Click on Browse ... and select the configuration file (e.g. configuration.bin).
3. Click on OK, to start the upload.