VEGA MoRoS GPRS 1.3 - Manual (Page 28)

Operating Principle MoRoS GPRS 1.3
28
11 Operating Principle
This chapter describes the basis procedures to operate and configure a MoRoS GPRS 1.3.
It will also give you an overview of the control elements of the web configuration. To
help you find the necessary control elements for your configuration tasks, later chapters
will refer to the figures of the interface in this chapter.
The MoRoS GPRS 1.3 is configurated and operated with the help of a web-based inter-
face. The interface itself is displayed and operated using a web browser such as Mozilla
Firefox or Microsoft Internet Explorer.
11.1 Operating the Web Interface
The web interface allows easy configuration of the MoRoS GPRS 1.3 with the help
of a web browser. All functions of the MoRoS GPRS 1.3 can be configured via the in-
terface. The operation is mostly self-explanatory. The interface also provides an
online help feature, which describes the meaning of possible settings of the MoRoS
GPRS 1.3.
Configuration and settings of the MoRoS GPRS 1.3 with the web interface.
How to configure the MoRoS GPRS 1.3 with the web interface.
The MoRoS GPRS 1.3 is connected to a network and switched on.
A PC, which is physically connected to the same network as the MoRoS
GPRS 1.3.
The PC is configured in a way that it is also logically connected to the Mo-
RoS GPRS 1.3 in the same network. The first three digits of the IP address of
the PC and the MoRoS GPRS 1.3 must be identical. For example, the MoRoS
GPRS 1.3 has the IP address 192.168.1.1. and the PC has the IP address
192.168.1.2.
A new generation web browser such as Mozilla Firefox or Microsoft Inter-
net Explorer is installed on the PC.
1. Start the web browser.
2. Enter the IP address of the MoRoS GPRS 1.3 in the address line.
The factory default IP address of the MoRoS GPRS 1.3 is 192.168.1.1.
A dialogue will prompt you to enter the user name and the password for
authentification.
3. Enter the user name and the password and click OK.
The default factory setting of the web interface for the
User name is "insys; the
Password is "moros".