Sony MEX-BT5100 - Manual (Page 19)

19
* Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
• During audio device playback, the track number,
elapsed playing time and playback status are not
displayed.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect a cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
Other settings
Setting a handsfree device
You can set various functions when a cellular
phone compatible with the Bluetooth function is
connected as a handsfree device.
1
Press (Bluetooth).
The Bluetooth function menu appears.
2
Select “Phone Settings.”
3
Select the desired menu.
4
Select the setting.
5
Press (Bluetooth).
Phone Settings menu
“
z
” indicates the default settings.
*1 If “Security” is set, “Security Locked” appears and
operation is not possible.
*2 If a character that cannot be displayed on this unit
is used, it is not displayed correctly.
*3 Depending on the cellular phone, this unit’s ring
tone may be output even if set to “Cellular.”
*4 Configurable during a call.
Note
If you select “Initialize” in the Security setting, all
stored data is deleted (“Dialed Calls,” “Received Calls,”
“Phonebook” and “Preset Dial”).
Deleting the registration of a
connected device
1
Press (Bluetooth).
The Bluetooth function menu appears.
2
Select “Connectivity” c “Handsfree
Devices” or “Audio Devices.”
The list of registered devices appears.
3
Select the device to delete.
4
Select “Delete” c “yes.”
To clear all devices in the selection list, select
“Delete All” in step 4.
Auto connection function
If your car’s ignition switch is set to the ACC
position, this unit reconnects automatically to the
last connected Bluetooth device.
To Do this
Skip tracks Push the joystick left/right.
Reverse/fast-
forward a track Push and hold the joystick left/
right.
Pause Press (6) (PAUSE)*.
Receive PB* 1 * 2 (Receive Phonebook)
To receive and store the phonebook data from a
cellular phone (page 18).
Auto Answer
– “on”: to start a call automatically when
received. Set the time to start a call: “1 sec” –
“60 sec”
– “off” (
z
): to not start a call until (CALL),
(MENU) or (Bluetooth) is pressed.
Ringtone
To switch the ring tone.
– “Cellular*
3 ” (
z
): to output the ring tone set
with the cellular phone.
– “Default”: to output this unit’s ring tone.
EC/NC Mode* 4 (Echo Canceller/Noise
Canceller Mode)
To reduce echo and noise in phone call
conversations.
Set to “Mode 1” (
z
) normally. If the quality of
the outgoing sound is unsatisfactory, set to
“Mode 2” or “off.”
Speaker Sel* 4 (Speaker Select)
To set the front speaker to output the ring tone,
dial-tone and other party’s voice.
– “FR-L” (
z
): to output from the left channel of
front speakers.
– “FR-R”: to output from the right channel of
front speakers.
– “Front”: to output from both front speakers.
Security
To lock the personal information in the
following menus by setting a 4-digit password
(page 17).
“Dialed Calls,” “Received Calls,” “Phonebook,”
“Preset Dial,” “Receive PB”
If you set the security, “Security Locked”
appears when the above menus are operated.
To unlock the security, select “Unlock” and
input the password number.