Banks Power Ford Trucks: (Diesel ’03 - 07 6.0L Power Stroke) Power Systems- PowerPack & Stinger '03-07 Compatible w_ Optional Banks iQ - Manual (Page 37)

96824 v.3.0
37
Table 1 Banks EconoMind Diagnostic Codes
Event Course of Action
1,1
Faulty Injection control Pressure (IcP)
input signal.
check the 46-Pin connectors. Reset EconoMind Diesel Tuner by turning key
on and off.
1,2
Faulty Manifold Absolute Pressure
(MAP) input signal.
check 3-pin MAP sensor connections. Reset the EconoMind Diesel Tuner
by turning key on and off.
1,3 Faulty EconoMind signal Input
Make sure the EconoMind switch is connected to the main wire harness.
Reset EconoMind Diesel Tuner by turning the key on and off.
2,1
Faulty Injection control Pressure (IcP)
output signal.
check the 46-Pin connectors. Reset EconoMind Diesel Tuner by turning key
on and off .
2,2
Faulty Manifold Absolute Pressure
(MAP) output signal.
check 3-pin MAP sensor connections. Reset the EconoMind Diesel Tuner
by turning key on and off.
2,3 Faulty Thermocouple signal check thermocouple connection
3,2
Power Up Error or Internal Module
Malfunction.
Turn ignition OFF and check fuse-tap power connection to EconoMind
Diesel tuner (under-dash panel). Turn ignition back ON and re-check for
presence of code.
3,3 Internal Module Malfunction
check the 46-Pin connectors. Reset EconoMind Diesel Tuner by turning key
on and off .
3,4
cAN communications Error With
Vehicle EcM, IcM or OBD System.
Turn ignition OFF and check the 46-Pin connectors and the in-cab OBD II
connection. Turn ignition back ON and re-check for presence of code.
4,2 Transmission Slippage Detected.
Transmission is slipping excessively. Code will automatically clear once
transmission stops slipping (repaired).
4,3
Faulty Exhaust Back Pressure (EBP)
input signal
check the 46-Pin connectors. Reset EconoMind Diesel Tuner by turning key
on and off .
4,4
Faulty Exhaust Back Pressure (EBP)
output signal
check the 46-Pin connectors. Reset EconoMind Diesel Tuner by turning key
on and off .
5,1 Internal Module Malfunction
check the 46-Pin connectors. Reset EconoMind Diesel Tuner by turning key
on and off .
If problem persists, call Gale Banks Engineering Tech Support.