Grain Systems PNEG-1743 - Manual (Page 24)

5. Operations
24 PNEG-1743 Vision for Tower Dryers
2. Moisture Control Setup: The moisture control setup operations are described in
greater detail in the Moisture Control Options Chapter on Page 35 .
Figure 5H
3. Unload Parameters:
a. Set Maximum Unload Rate: The meter roll speed setpoint cannot be set higher than this value.
This prevents choking downstream augers.
b. Set Minimum Unload Rate: The meter roll speed setpoint cannot be set lower than this value.
(See Figure 5I.)
Figure 5I