Set time/date temp scale dryer model – Grain Systems PNEG-1743 User Manual
Page 28
![background image](/manuals/277753/28/background.png)
5. Operations
28
PNEG-1743 Vision for Tower Dryers
4. Set Time/Date: The
button will display the “Set Time/Date” window.
Figure 5O
Use the “Up” and “Down” buttons to change each of the parameters. “Accept/Exit” will save
settings and return to the “Setup Screen”.
5. Temp Scale: The
button allows the user to select either English units or SI units.
Depending on what temperature scale you are now operating, this button will display a
pop-up window asking if you want to switch to SI (Celsius, metric tons, etc.) or English units
(Fahrenheit, bushels, etc.).
6. Dryer Model: This
button will display the “Dryer Hardware Setup” window.
The following items must be entered correctly:
a. Number of Fans
b. Fuel
c. Model Number
Figure 5P
To edit these parameters, touch the “Select” button until a check mark appears next to the
corresponding detail specific to the dryer model.