Software version info, M/c button, Modifying temperature setpoint – Grain Systems PNEG-1743 User Manual
Page 33
Advertising
5. Operations
PNEG-1743 Vision for Tower Dryers
33
6. Software Version Info:
This option will list the major software changes and
additions in relation to the last software release.
Figure 5W
M/C Button
The
button is used to change setpoints for the moisture controls. Pressing the button will
access one of the following two (2) screens, depending on the drying scheme selected.
Modifying Temperature Setpoint
Figure 5X
Advertising