Grain Systems PNEG-1743 - Manual (Page 48)

8. Safety Circuit Shutdown Messages
48 PNEG-1743 Vision for Tower Dryers
Moisture Control Shutdown Messages
0F01 - MC - Network Connection Failed
This error is generated whenever the master display board (lower control panel) has lost its
communications link with the moisture board (lower control panel or separate enclosure). Check the
Ethernet cable jacks to make sure they are plugged in tightly.
0F02 - Max Drying Time Exceeded
This safety can be used when drying in stage batch mode. See Moisture Control Options Chapter on
Page 35 for a detailed explanation.
0F03 - Max Grain Temperature Exceeded
This safety can be used when drying in continuous flow or stage batch mode. See Moisture Control
Options Chapter on Page 35 for a detailed explanation.