Grain Systems Unload Augers PNEG-1430 - Manual (Page 12)

12 PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader
4. Assembly
Attaching the Adapter Plate (for 6"-8", 8"-10" and 10"-12")
1. Align studs on adapter plate with the holes on the unload tube’s angle ring.
2. Insert studs through the holes and fasten using nuts from tube end plate. (See Figure 4A.)
Figure 4A
Assembling Support Stand
1. Insert support stand base into support stand top and secure with 3/8" x 1-1/4" bolt. (See Figure 4B.)
Figure 4B