Installing the belt guard brackets, Assembly – Grain Systems Unload Augers PNEG-1430 User Manual
Page 16
Advertising
![background image](/manuals/277818/16/background.png)
4. Assembly
16
PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader
Installing the Belt Guard Brackets
1. Align the holes on the bearing plate with the slots on the belt guard mounting brackets.
2. Secure the brackets with proper bolts, flat washers and serrated flange nuts.
Figure 4H
NOTE: DO NOT tighten the bolts completely. The brackets will need to be rotated to align the slot in the
belt guard with the shafts on the motor and flight.
Belt Guard Mounting Bracket Bolt
Part #
Bolt Size
Description
S-1196
6" to 6", 6" to 8" and 8" to 8"
5/16"-18 x 1" Grade 5 Bolt
S-2071
8" to 10" and 10" to 12"
3/8"-16 x 1-1/4" Grade 5 Bolt
Advertising