Grain Systems Unload Augers PNEG-1430 - Manual (Page 14)

4. Assembly
14 PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader
Installing the Motor Mount Adjuster
1. Place motor mount adjuster between the head plate and back plate on the discharge tube.
2. Insert pivot rod through the tube plates and motor mount adjuster. Secure in place with two (2)
3/16" x 2" cotter pins. (See Figure 4E.)
Figure 4E