Grain Systems Unload Augers PNEG-1430 - Manual (Page 23)

PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader 23
7. Operation
Operate the Auger
NOTE: The auger capacity can fluctuate greatly under varying conditions. Moisture content, different
commodities, amount of foreign matter and speeds all play a part in the performance of the auger.
For example, 25% moisture may cut capacity by as much as 40% under some conditions.
A. Make certain there are at least two (2) people in the work area to monitor operations at all times.
B. Visually inspect the auger periodically during operation.
C. Consideration should be given to the proper size auger for a batch drying or any intermittent type
operations. When augers are stopped and re-started under full load, it may result in damage to the
auger. Using a larger diameter auger and reducing its load level is generally preferable to subjecting
a smaller diameter auger to big loads. If an auger is kept from absolute filling, it will make start-up
easier and it will convey more efficiently.
WARNING
Be alert for any unusual vibrations, noises and the loosening of any fasteners. If
anything unusual is detected, immediately shut down the auger, disconnect and
lock out the power source before servicing.