Attaching support stand to tube attaching flights, Attaching support stand to tube, Attaching flights – Grain Systems Unload Augers PNEG-1430 User Manual
Page 13
Advertising
![background image](/manuals/277818/13/background.png)
4. Assembly
PNEG-1430 6"-6", 6"-8", 8"-8", 8"-10" and 10"-12" 25° Bin Unloader
13
Attaching Support Stand to Tube
1. Place support stand and half band around tube and secure together with 5/16" bolts and serrated
flange nuts.
Figure 4C
Attaching Flights
1. Pull bin unload flight out of unload tube approximately one foot (1').
2. Remove bearing connecting stub bolts and nuts from connecting stub.
3. Position 25° unloader assembly in-line with bin tube.
4. Align holes in unload flight with holes in bearing connecting stub and slide flight onto stub.
5. With holes aligned, secure with bearing connecting stub bolts and nuts that were removed in
.
Figure 4D
Advertising