Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder User Manual
Page 23
23
9223-OM (V2.0)
General
Configuration
Video
Configuration
Audio
Configuration
Apply/Cancel
Configuration Changes
Basic Tab – Video Configuration
The 9223 is capable of automatically identifying the video signal present in the selected input
connection. The detected signal is reported in the Encoder Statistics Tab. Additionally, the
encoder can also be set to auto-configure its input based on the detected signal:
•
Video Input Settings: This parameter selects whether or not the encoder will auto-
configure based on the detected video input signal.
o
Manual Selection: The input signal must be correctly selected using the Input
Resolution, Input Source, and Field/Frame Rate controls for the encoder to run.
If the input signal does not match the settings, the encoder will not run.