Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder User Manual
Page 89
![background image](/manuals/279964/89/background.png)
89
9223-OM (V2.0)
To configure one of the TPGs, click on the Edit button on its row. The following configuration
parameters are displayed:
Output Selection
Connection
Parameters
TPG
Configuration
Parameters
Output Selection
Connection
Parameters
TPG
Configuration
Parameters
The configuration interface is divided into two areas:
•
TPG Configuration Parameters, described in this section.
•
Output Selection Connection Parameters, described in the Destination Selection
section of the Connections Tab chapter.
The TPG Configuration Parameters are:
•
Port Name: All 9223 ports have a user-defined name, to facilitate routing. Enter any
suitable name.
•
Mode: controls the type of MPEG-2 transport packets generated. The options are:
o
Disabled: TPG is disabled. No packets are being generated.
o
NULL Packets: TPG is generating NULL packets. If you select this option, the
PID parameter becomes read-only with the value 1FFF.