Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder - Manual (Page 74)

74
9223-OM (V2.0)
Connections Tab
The Connections allows the creation, deletion, and management of input-output connections.
The Statistics tab includes all connected input/output status indicators and an overall summary
status indicator, which allows the operator to immediately pinpoint errors.
Connections Configuration Tab
The Connections configuration tab is depicted below. The message “No Connections” will be
displayed if there are no configured input/output connections in the 9223. If the 9223 has two
encoder channels installed, there will be two lower tabs, to switch between the Connections
configuration interface and the MPTS configuration/status interface.
Present only if two encoder
channels are installed Present only if two encoder
channels are installed
To establish a connection, simply select a source and a destination, and then click on Apply.
Source Selection
There are four sources in the 9223:
Up to two Encoder channels (described in the Network Statistics DNS
Tab
The Network Statistics DNS Tab reports the current DNS configuration.