Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder User Manual
Page 56
56
9223-OM (V2.0)
•
SDI Standard: this indicator reports the detected SDI signal. Possible values are
unlocked, SD SDI, HD SDI and 3G SDI. This is useful to resolve SDI signal mismatch
issues (for example, when the input signal is SD SDI and the encoder is configured for
HD).
If the input is SDI and the Audio Source parameter in Basic Tab – Audio Configuration is set to
SDI Embedded Audio, two more indicators are shown:
•
Encoder 1/2 Embedded Audio: This indicator flags whether or not embedded audio is
actually present on the selected Group/Channel combination (see Basic Tab – Audio
Configuration). The following values are presented:
o
Present: Embedded audio is present in the selected Group/Combination.
o
Not Present: The SDI input has no lock, it is not possible to determine
whether embedded audio is present or not.
o
Not Present: Embedded audio is not present in the selected Group/Channel
combination. Check the source settings, or select a different Group/Channel
combination.
•
Encoder 1/2 Audio Status: This indicator flags any errors in the embedded audio and
will have the following values:
o
OK: No errors detected.
o
Not Present: Embedded audio is not present – errors cannot be detected. This
status will be issued when there is no SDI lock, or when there is no embedded
audio.
o
Error: Embedded audio errors are being detected. If this indicator is red,
audio is corrupted or glitching. The possible causes for this are: