Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder - Manual (Page 37)

37
9223-OM (V2.0)
can be used to override the original AFD information, or when the video is being
scaled (e.g., when the input is HD and is being converted to SD).
•
AFD Code: This control is displayed only when AFD Source is set to Manual AFD
Selection. It corresponds to the codes listed in SMPTE-2016-1, Table 1.
HD
SD-SDI
Composite
Advanced Tab – Audio Parameters
The Audio Parameters are divided into three subgroups, some of which vary (and may not be
present) according to the selections made in the Encoder Basic Configuration Tab. A sample of
the Audio Parameters section is depicted below.