Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder User Manual
Page 85
![background image](/manuals/279964/85/background.png)
85
9223-OM (V2.0)
•
Auto-Reboot After Update: This field controls whether or not the 9223 will
automatically reboot after a successful firmware upload through Dashboard. By default,
the 9223 will
not
reboot after an update. You can upload the firmware at any time, and
reboot later during a maintenance window.
Admin Config Files Tab
As you make configuration changes to the 9223, they are automatically persisted in non-volatile
storage. If the card is rebooted or power-cycled, it will come back in the same configuration.
In addition to automatic configuration persistency, the 9223 also offers the ability to save up to 5
complete configurations, load them, and even export them. This can be used to quickly
configure it for different scenarios, or for saving configuration “checkpoints” as a complex
configuration is built. Since configurations can be exported, they can be archived outside the
card as well.
Finally, the 9223 also offers 5 pre-saved configuration templates for some common scenarios.
The layout of the Admin Config Files tab is shown below.