Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder - Manual (Page 84)

84
9223-OM (V2.0)
upgrade file. Note that you can simultaneously upgrade all of your 9223 cards over multiple
chassis if you wish.
Note that uploading firmware to the 9223 does not affect its operation in any way and does not
introduce any glitches in the inputs/outputs.
Note: To allow for a controlled transition to operation when upgrading firmware, reboot the card
to engage the new firmware. The card will go off-line while rebooting.
The fields in the Firmware Image Management tab are:
•
Factory Image, Image 1, and Image 2: These contain version and release date
information for the corresponding firmware images. If no image is present, this field will
indicate No Image.
•
Upload Location: This field contains the location where the image upload will go. The
9223 automatically chooses a location that will not overwrite the currently running
image.
•
Boot Location: This field indicates which image will be used in the next boot. If an
image is successfully uploaded through Dashboard, this automatically changes to point to
that image. It can also be manually changed.