Cobalt Digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder - Manual (Page 73)

73
9223-OM (V2.0)
Ethernet Port 1 Ethernet Port 2
The indicators can have the following values:
•
OK: The IP Output is operating normally (either streaming or ready to stream).
•
No Response: The IP Output is configured for unicast operation, but it does not have a
destination MAC address. If there is a connection to this output, Dashboard™ Card State
and the Status LED will be red.
•
Overflow: The IP Output is configured for NULL Padding with a manual rate, and the
connected bitstream(s) exceed that configured manual rate. If this alarm is asserted,
packets are being dropped . The Dashboard™ Card State and the Status LED will be red.
•
No Response: The IP Output is configured for unicast operation, and the destination
stopped responding to ARP. The IP Output is using an old cached MAC address. If
there is a connection to this output, the Dashboard™ Card State will be yellow (but
packets are being transmitted).
•
Disabled: The IP Output has been disabled (by setting Enable to No).