Net Optics iTap 10 GigaBit Port Aggregator - Manual (Page 25)

iTap 10 GigaBit Port Aggregator
21
Check the Installation
You have connected the iTap Port Aggregator to the network, to the monitoring
device, and to power. It should now be functioning correctly. Check the status of the
following:
• Check that at least one power LED is illuminated.
• Check the link status LEDs located on the front panel to verify that the links are
connected.
• Check the display for utilization and peak information.
• Verify that the monitoring devices are receiving traffic from the iTap Port
Aggregator.
• Verify that the Management Port is functional by typing the iTap Port Aggregator's
IP address in a Web browser. Net Optics' Web Manager should appear.