Asus PCI-DA2200 - Manual (Page 207)

ASUS GUI RAID Manager: Installation
2-22 2.4 Software Setup
♦
Ensure that your system meets the minimum hardware and
software requirements listed in the System Requirements
section.
♦
Ensure that the disk array system is installed properly. For
the installation procedure, see the documentation that came
with the controller.
♦
For local management (that is, management from the local
host) and remote management via the telephone line, you
will only need to set up for a Local Manager Site. For fast
setup, just accept the default values presented by the setup
program.
♦
For remote management over the network using SNMP,
ensure that the remote manager station has Windows NT.
You will need to set up for an SNMP Manager Site on the
remote station, and SNMP Agent Site on the local host.
The setup program helps you achieve these tasks by
providing setup options.
2.4.2 Setting up the GUI RAID Manager
Follow these steps to set up the GUI RAID Manager on your
system:
1. Insert DISK1 into the appropriate disk drive.
2. Run SETUP.EXE from DISK1. The setup welcome screen
appears: