Configure bios – Asus PCI-DA2200 User Manual
Page 62
7-2
ASUS PCI-DA2200 User’s Manual
Configure RAID
Configuration Color/Monochrome
Configure BIOS
Configure Card
Configure SCSI
Reset to Defaults
7.1.1. Configure BIOS
Enable BIOS INT 13H Function
Yes
BIOS Translation Mode
Auto
Support for Disks > 1 GB
Yes
Support for 3 Disks or More (MS-DOS v5.0 or above)
Yes
Support for NOT-ZERO SCSI LUN
Yes
Configure BIOS Devices
<Enter>
Move the cursor to the item desired to change.
Enable BIOS INT 13H Function
Press [Space] to toggle between Yes or No.
BIOS Translation Mode
Press [Space] to toggle between Auto and Fixed. Use fixed mode
together with disabling "Support for Disks > 1GB" for UNIX/DOS or
UNIX/OS2 dual boot system. Use Auto mode for other OS'.
Auto mode :
BIOS detects the existing CHS mapping from the disk.
If any valid CHS mapping is found, BIOS uses it.
If no valid CHS mapping is found, BIOS uses Fixed mode.
Fixed mode :
If option "Support for Disks > 1 GB" is disabled, BIOS uses
SectorsPerTrack = 32, TotalHeads = 64.
If option "Support for Disks > 1 GB" is enabled, For disk size <= 1GB,
BIOS uses SectorsPerTrack = 32, TotalHeads = 64. For disk size >
1GB, BIOS uses SectorsPerTrack = 63, TotalHeads = 255.
Support for Disk > 1 GB
Press <Space> to toggle between Yes or No.