Asus PCI-DA2200 - Manual (Page 216)

ASUS GUI RAID Manager: Basic Operations at Startup
3-2 3.1 Starting the GUI RAID Manager
Double-click on the ASUS GUI RAID Manager icon. The
ASUS GUI RAID Manager main window appears on the
screen.
2. Connect to the disk array system. For information on how to
connect, see the Connecting and Disconnecting from a Disk
Array System section of this chapter.
4 4Starting the GUI RAID Manager under the Windows NT
3.5x environment
1. Open the ASUS GUI RAID Manager group window from
the Program Manager, if not yet open.
2. From the ASUS GUI RAID Manager group window,
double-click on the ASUS GUI RAID Manager icon. The
ASUS GUI RAID Manager main window appears on the
screen.
3. Connect to the disk array system. For information on how to
connect, see the Connecting and Disconnecting from a Disk
Array System section of this chapter.
For remote management, see the appropriate section below.
4 4Starting the GUI RAID Manager for remote management via
network
1. Turn on the local host and enable the appropriate SNMP
service. For information on how to enable the SNMP
service for Windows NT, Windows 95/98, or Novell
NetWare, see their respective manuals.
2. Check to ensure that the local host is properly connected on
the network. Take note of its IP address (or SNMP agent’s
name) and community names.