Asus PCI-DA2200 - Manual (Page 61)

7-1 ASUS PCI-DA2200 User’s Manual
Chapter 7 BIOS Configuration Utility
At system bootup, the ASUS PCI-DA2200 BIOS displays the
following message:
ASUS PCI-DA2200 (PCI-TO-SCSI RAID) BIOS v1.17B
PCI Bus # = 00
Device # = 09 Port = E000 IRQ = 10 EDORAM=8 MB FW=2.12
!! Press <Ctrl><I> for Configuration Utility, <Q> to Skip !!
PCI Bus#, Device #:
displays the PCI bus and PCI device number that has
been assigned to ASUS PCI-DA2200. The numbers
are in hexadecimal.
Port : shows the I/O port base address that has been
assigned to ASUS PCI-DA2200.
IRQ : shows the Interrupt level that has been assigned to
ASUS PCI-DA2200. The level is in decimal.
EDORAM : displays the cache RAM type and size that is been
installed on ASUS PCI-DA2200.
FW : shows the firmware version number of ASUS PCI-
DA2200.
The ASUS PCI-DA2200 BIOS waits 3 seconds for a keystroke. You
can press [Ctrl-I] to enter the configuration utility, or press Q to skip
waiting for a keystroke.
If [Ctrl-I] is pressed to enter configuration utility, the main menu will
appear. There are two functions in the main menu: Configuration and
Color/Monochrome.
7.1 Configuration
There are five functions in the Configuration Option: Configure BIOS,
Configure Card, Configure SCSI, Configure RAID and Reset to
Defaults.