Asus PCI-DA2200 - Manual (Page 51)

4-7 ASUS PCI-DA2200 User’s Manual
4.4.4 Mixing LVD and Single-ended Devices
…..
SCSI cable
* All drives, terminators and SCSI cables
should use Ultra2 Wide SCSI (LVD)
compliant devices only.
* Singled-ended devices should be converted
to LVD mode using a “Single-ended to LVD
converter” before connecting to the LVD
SCSI bus.
Ultra2 Wide SCSI Bus (LVD)
Terminator
Disabled
Terminator
Disabled
CH0
CH1 CH0
CH1
External
LVD
Terminator
…..
SCSI cable Ultra2 Wide SCSI Bus (LVD)
External
LVD
Terminator
…..
SCSI cable Ultra2 Wide SCSI Bus (LVD)
External
LVD
Terminator
…..
SCSI cable Ultra2 Wide SCSI Bus (LVD)
External
LVD
Terminator
Internal and External Channel 0 totally Up to 15 drives
Internal and External Channel 1 totally Up to 15 drives
S.E. to LVD
SCSI
Converter
Single-ended CD-ROM Drive
or
other Single-ended device
S.E. to LVD
SCSI
Converter
Single-ended MO Drive
or
other Single-ended device
It is not recommended to connect any Single-ended devices to the LVD
drive SCSI bus directly. Using a “single-ended to LVD converter” to
convert the Single-ended device to LVD before connecting to the drive
SCSI bus.
Any Single-ended devices connecting directly to the LVD SCSI bus will
force all the devices switch back to single-ended mode. The cable length
and maximum devices should follow Single-ended standard if the bus is
operating in Single-ended mode.
IMPORTANT:
Changing any settings in “View and Edit SCSI Channels” requires a system
reset to take effect.
F F