Asus RS260-E4/RX8 - Manual (Page 153)

ASUS RS260-E4/RX8 7-3
For systems with Red Hat ® Enterprise versions that are not listed in the
Makedisk menu, explore the support CD and copy the RAID driver disk from the
following path:
For Intel ® 6321 LSI MegaRAID: \Drivers\6321 LSI MegaRAID\Driver\Linux\
For LSI 1068 SAS: \Drivers\LSI 1068\Driver\Linux\
The paths above may differ based on variant models.
6. Place a blank, high-density floppy disk to the floppy disk drive, then select the
type of RAID driver disk you want to create by typing the number before the
option
7. Press <Enter>.
8. Follow screen instructions to create the driver disk.
7.1.2 Installing the RAID controller driver
Windows ® 2000/2003 Server OS
When installing the LSI 1068 driver to your OS, make sure the driver you are
installing supports your current installed OS. We STRONGLY RECOMMEND
that you use the LSI 1068 SAS utility bundled in the support CD to create a
driver disk. Refer to page 6-1 for more information.
During Windows ® 2000/2003 Server OS installation
To install the RAID controller driver when installing Windows ® 2000/2003
Server OS:
1. Boot the computer using the Windows ® 2000/2003 Server installation CD.
The Windows ® 2000/2003 Setup starts.
2. Press <F6> when the message “Press F6 if you need to install a third party
SCSI or RAID driver...” appears at the bottom of the screen.
3. When prompted, press <S> to specify an additional device.