Asus RS260-E4/RX8 - Manual (Page 67)

ASUS RS260-E4/RX8 4-3
4.1.2 Layout contents
Jumpers Page
1. Clear RTC RAM (CLRTC1) 4-6
2. LAN bandwidth setting (3-pin LAN_BW1) 4-7
3. USB device wake-up (3-pin USBPW12, USBPW34) 4-7
4. Keyboard power (3-pin KBPWR1) 4-8
5. VGA controller setting (3-pin VGA_EN1) 4-8
6. Onboard storage setting (3-pin SAS_EN1) 4-9
7. Force BIOS recovery setting (3-pin RECOVERY1) 4-9
Switch Page
1. DIP switch (DIP_SW1) 4-10
Internal connectors Page
1. Floppy disk drive connector (34-1 pin FLOPPY1) 4-11
2. IDE connector (40-1 pin PRI_IDE) 4-11
3. Hard disk activity LED connector (4-pin HDLED1) 4-12
4. Mini-SAS connectors 4-13
5. USB connector (10-1 pin USB34) 4-14
6. Serial port connector (10-1 pin COM2) 4-14
7. CPU and system fan connectors
(4-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2/3/4, FBD_FAN1/2)
4-15
8. Power supply SMBus connector (5-pin PSUSMB1) 4-15
9. SSI power connectors
(24-pin ATXPWR1, 8-pin ATX12V1, 4-pin ATX12V2)
4-16
10. Parallel port connector (26-1 pin LPT1) 4-17
11. Backplane SMBus connector (7-1 pin BPSMB1) 4-17
12. SAS LSI1068 ports LED connector (18-1 pin SASLED1) 4-18
13. Serial General Purpose Input/Output connector (6-1 pin SGPIO1) 4-18
14. System panel connector (20-1 pin PANEL1) 4-19
15. Auxiliary panel connector (20-2 pin AUX_PANEL1) 4-20
16. Trusted Platform Module connector (20-1 pin TPM1) 4-21
17. LPC connector for LPC debug card (14-1 pin LPC1) 4-21