Asus RS260-E4/RX8 - Manual (Page 22)

Chapter 2: Hardware setup 2-2
2.1 Chassis cover
The chassis features a “screwless design” that allows convenient assembly and
disassembly.
•
Remove the front bezel to access the hot-swap HDDs, optical drive, and
floppy drive.
• Remove the chassis cover to access the internal components or if you want
to install system devices.
2.1.1 Removing the front bezel
To remove the front bezel:
1. Hold the sides of the front bezel,
then slightly press the middle part to
disengage it from the front panel.
2. Pull the bezel from the front panel.
Press here to release
The ASUS stylish front bezel is purchased separately.