Asus RS260-E4/RX8 - Manual (Page 38)

Chapter 2: Hardware setup 2-18
2.4 Hard disk drives
To install a hard disk drive:
1. Open the front bezel to access the
hot-swap drive trays.
2. Release a drive tray by pushing the
spring lock to the right, then pulling
the tray lever outward. The drive
tray ejects slightly after you pull out
the lever.
3. Firmly hold the tray lever and pull
the drive tray out of the bay.
4. An empty drive tray includes a metal
bracket for support. Use a Phillips
(cross) screwdriver to remove the
bracket if you wish to install a hard
disk in the drive tray.
Metal bracket